|
[QUOTE=befu;10107]I was wondering about this topic also. How would you do the gas block on an integral rifle?pistol gas port
The 9mm does not have a gas block. I would bet your barrel is held in by the suppressor assembly. Nope! That way you never have a SBR. If the suppressor is off, the barrel is not secured.
On the 300 whisper, if you assembled it with the short barrel and BEFORE you put the can on it, it would be a SBR. Yep! thats why you dont assemble it I have been trying to figure out how you could do a integral can on a gas operated barrel.You buy a 16 inch,cut it down to make the right length with the can,put the can on it after the pistol position gas block
The only way I can think of right now is to have the can start after the pistolgas port and be welded to the barrel. yep! if the can is removable it wouldnt be a integeral
Remember, if the barrel can be secured during assembly without the can making it 16", it is a SBR. Wouldn't want to chance it with the ATF.Thats why you send yor barrel to SRT and have it made into a integeral, unless you file a form 1 and make it yourself
|