Quarterbore's Forums - Remmy 700 Extraction/Ejection?

Page 2 of 2

Show 40 post(s) from this thread on one page

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)

- 300 Whisper Rifles and Pistols (http://www.quarterbore.net/forums/forumdisplay.php?f=37)

- - Remmy 700 Extraction/Ejection? (http://www.quarterbore.net/forums/showthread.php?t=5412)

Scoop

03-27-2011 11:39 PM

Quote:

Originally Posted by Spook (Post 28044)

Have someone install a Sako style ext...if that doesnt fix it mail it to me and I'll straighten it out for you. Hope you get it fixed.

Thanks Spook. I may end up going that route.

mavrick

03-29-2011 02:16 AM

I have a fireball action 300 whisper and thats about as good as it gets just work that shifter pretty good. I used AICS 223 mags to help cure my feeding troubles.

Scoop

03-29-2011 11:30 PM

Thanks mavrick. No feeding problems at all (I'm using CDI Precision's bottom metal and AICS 10-rounders too), just the ejection woes.

Hoser

03-30-2011 11:44 AM

Sako or M-16 extractors are the way to go if you are using a R700.

Titleiiredneck

04-05-2011 03:54 PM

Yep, get the correct extractor installed and you will be gtg!

Scoop

09-19-2011 03:47 PM

Quote:

Originally Posted by amafrank (Post 28037)

We have found that by removing the ejector pin and extending the notch for the retaining pin so that it can be pushed further out by the spring it will hold the case longer. . . long enough for it to clear the receiver side and be ejected.

Hope that makes sense....it worked for us on most of the problem guns. Frank

Sorry for not updating this sooner. Tried this fix and it cured my problem completely. Ejects reliably now. Thanks Frank.

All times are GMT -4. The time now is 08:08 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page