Quarterbore's Forums - making brass w/a CH4D die and Dillon RT

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)

- 300 Whisper Rifles and Pistols (http://www.quarterbore.net/forums/forumdisplay.php?f=37)

- - making brass w/a CH4D die and Dillon RT (http://www.quarterbore.net/forums/showthread.php?t=5232)

sgms18

03-06-2011 08:58 PM

making brass w/a CH4D die and Dillon RT

Looking at getting a Dillon RT and a CH4D trim die to make whisper brass. I read somewhere that you need a taller shell holder, whewe can I get it? I'll be using them on o single stage LEE.

TCCrewchief76

03-07-2011 01:40 AM

Unless you plan on making tens of thousands of pieces of brass, the more economical route would be to have Hoser make you brass. To answer your question, the shellholder you need is an extended shellholder; mine is made by Redding and it is a #10E.

Kevin

thehouseproduct

03-07-2011 01:04 PM

RCBS makes extended shellholders as well.
http://www.midwayusa.com/viewProduct...tNumber=150644
http://www.midwayusa.com/viewProduct...tNumber=332225
http://www.midwayusa.com/viewProduct...tNumber=179534

All times are GMT -4. The time now is 08:46 AM.