Quarterbore's Forums - Shop Press Made

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)

- The welding forum (http://www.quarterbore.net/forums/forumdisplay.php?f=76)

- - Shop Press Made (http://www.quarterbore.net/forums/showthread.php?t=3693)

aametalmaster

05-24-2010 11:08 AM

Shop Press Made

3 Attachment(s)

I started this over 15 years ago. It sat in the corner all cut, punched and unwelded. I just had to machine the ring to hold the jack and the ram holder for the bottom. I can change tooling in a second. I removed the u joints from a junkyard driveshaft to try it out in 5 minutes. Everyone that sees it wants one but i don't think i can compete with HF Tools. Those places weren't around when i started it...Bob

aametalmaster

11-26-2012 07:10 PM

Updated with new jack

5 Attachment(s)

I finally got the 12T jack put on...Bob

sha-ul

11-27-2012 09:53 PM

Now THAT was a long term project.:tongue:

aametalmaster

12-02-2012 04:20 PM

Bearing splitter for the shop press

6 Attachment(s)

Made a bearing splitter in the lathe this morning. Been wanting one for quite a while but didn't want to spend 40 bucks on ebay for one...Bob

aametalmaster

07-20-2013 05:32 PM

3 Attachment(s)

Lawn mower tire bead breaker...Bob

aametalmaster

07-20-2013 07:18 PM

2 Attachment(s)

Punch for bending flat bar...Bob

All times are GMT -4. The time now is 11:05 PM.