Quarterbore's Forums - 300 fireball barrels in stock!

Page 3 of 3

Show 40 post(s) from this thread on one page

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)

- 300 Whisper Rifles and Pistols (http://www.quarterbore.net/forums/forumdisplay.php?f=37)

- - 300 fireball barrels in stock! (http://www.quarterbore.net/forums/showthread.php?t=3401)

Scalce

02-11-2010 02:42 PM

Quote:

Originally Posted by TheAlmightyBob (Post 18096)

Also to address the gas block issue some of you brought up. I have to say that mine has worked with no modification right from the start. I measured the gas hole *which is posted somewhere on here* at about .0925 - .0950. I find that this size doesnt kill you with recoil on supersonics, and is also enough to cycle subsonics. And just to throw this in there, my 147's are subsonic.

So you are using the stock gas block with both supersonic and subsonic rounds and they all cycle the action and lock back the bolt carrier everytime?

Do you shoot suppressed?

Garrett

02-11-2010 03:48 PM

Quote:

Originally Posted by TheAlmightyBob (Post 18096)

And just to throw this in there, my 147's are subsonic.

I just got one of these barrels. What powders are you using with the 147 subsonics?

N310toN170

02-16-2010 11:22 PM

Noveske barrels

Are these stainless or chrome lined?

TheAlmightyBob

02-18-2010 09:27 AM

I do shoot this barrel suppressed with the stock gas block. I havn't had any problem with it, or without it.

Titleiiredneck

02-18-2010 03:02 PM

Quote:

Originally Posted by N310toN170 (Post 18214)

Are these stainless or chrome lined?

stainless threaded 5/8x24tpi

wescus

03-01-2010 08:04 PM

Can you get these barrels threaded 9/16-24?

Titleiiredneck

03-01-2010 09:16 PM

if you custom order one, but you can always get a adapter or cut and rethread

N310toN170

03-02-2010 01:53 PM

I've got mine ordered and its been about a week waiting so far... I'll post my thoughts once I have a chance to get it up and running.

In the meantime this thread has come up regarding load development specifically for the Noveske 16"...

http://www.quarterbore.net/forums/showthread.php?t=3481

If you have experience with this barrel, please post...I'm sure it will save people some valuable time.

All times are GMT -4. The time now is 10:25 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page