Just finished up another bunch of 300 Whisper Rimmed (parent case, 357 max) brass for a friend.

Please send me a PM or an email before you send me any 223/5.56 brass to process so I have a way to contact you.

Hoser makes fantastic brass for a great price! But as he said, when it gets to the end user it still might need some finish work.

I discovered that the Lake City brass that I purchased from him is just a little too thick in the neck for my 247gr NOE cast bullet. The bolt on my AR15 does not want to close when the round is chambered. I'll probably need to run an inside neck reamer in a few to get them to work properly.

No fault of Hoser's, whom I will purchase from again in the future, just passing along the information.

If you think that you might have a tighter chamber, let me know and I can send out a sample of my brass to make sure it works.

Hoser Brass
 

I got 500 rounds of brass a few months ago, worked great. Will be ordering some more soon, especially good deal at the new lower prices.

Kelly
HK91

Got done shooting the Thunderbeast Team Challenge this weekend in Logan NM. One heck of a good time. This might be the toughest match I have ever shot.

I almost used my 20 inch 300 WTF upper but went back to the LaRue OBR Lite in 223 with a Loopy 1-8 at the last minute when I heard there might be carbine targets past 500 yards. The longest shot for me was just under 600 yards, and I had to shoot it off sticks...

The night stages were a pressure cooker with minimal shots and lots of points on the line.

http://www.snipershide.com/forum/ubb...2663133&page=2

There was lots of my brass on the prize table as there will be again next year.

Thanks to all the match staff, match sponsors and shooters.

Looks like fun! Thanks for supporting the shooting sports with your brass. I'm still working on losing the last batch I bought from you. It may be a few more months.

Back in town and making chips...

Just got done with another batch of brass. Let me know if you need more.

Still turning your 223 brass into 300 Whisper/Blackout brass. Under a 2-3 day turn time.

Just a heads up.

204 Ruger brass does not make good 300 WTF brass.

I had a guy send me 500 pcs for conversion. The brass is way too thick in the newly formed neck area.

Time to back downstairs and play with my new Giraud annealer.

Glad to see you are still around, I figured you were quite busy around Colorado Springs.& I got a bit worried when one of the aerial tankers went down.

Still here. I was on MAFFS 2 working a different fire at the time.

Services are next week in Charlotte. A bunch of us from Peterson AFB are going.

http://wildfiretoday.com/wp-content/...FFS-7-crew.jpg

http://wildfiretoday.com/2012/07/03/...es-identified/

My Condolences to the Friends& families that are grieving.

Those of you that went to the Steel Safari, Thunderbeast Team Challenge, Snipers Hide Cup or the 2012 Colorado State 3-Gun Championship saw lots of my brass on the prize table.

I am still making brass and still converting your brass.

Brass conversion is .10 each.

Hoser, are you annealing your brass?

I did some of my bolt gun Lapua brass, but I dont think it is really worth it or needed.

For my semi auto brass the primer pockets give out long before the necks split.

I have had some people ask me do it on my Giraud annealer and they were/are happy with the results.

Knocked out a bunch of brass this weekend.

I must have three to four 20mm ammo cans full of the stuff.

Lots of brass on hand and ready to ship.

Those of you attending the Thunderbeast Team Challenge next weekend in Logan NM will find lots of 300 Whisper/Blackout brass on the prize table. I also support many other Regional and National level matches with my brass.

Just my way of giving back to the sport.

Hope to see some of you there.

Where's that like button when you need it?

I have the weekend off and am going to fire the 1050 back up and get ahead on inventory.

$100 shipped per 500.
$190 shipped per 1000.

Those prices include shipping.

Just received 1,000 pcs from Hoser . Like everyone says - I'm pleased . Brass nicely tumbled, brass is in good shape, trim length is uniform . He even sent some extra pcs of brass . He also shipped out the brass very quickly . Thanks Hoser !

david

Glad you got it safe and sound.

You got my last bit of Lake City.

I always toss an extra handful of brass in there just in case a skunky case or two made it through the inspection process.

Do you have any brass for sale?

PM sent...

what Bill asked ..

got any brass for sale?

PM sent...

Back in town and slogging my way through a couple orders of brass.

$100 shipped per 500.
$190 shipped per 1000.

If you provide the brass, it is .10 each to clean, trim, polish and return your brass.

Back in town from my East African vacation.

Still making brass and lots on the shelf and ready to ship.

$100 shipped per 500.
$190 shipped per 1000.

Glad you're back

They need forest fires put out in East Africa?? :grin:

I take it the MAFFS was left at home...

Yeah. I spend my summers fighting fires and my winters fighting bad guys.

Back from SHOT.

PMs replied to.