Quarterbore's Forums
Page 4 of 16 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)
-   300 Whisper Ammo and Reloading (http://www.quarterbore.net/forums/forumdisplay.php?f=38)
-   -   Brass Services / For Sale (http://www.quarterbore.net/forums/showthread.php?t=3314)

Titleiiredneck 09-05-2010 10:19 PM
Quote:
Originally Posted by MarkK (Post 23150)
I have had Hoser process brass for me twice (2K total). They do not come any better than him to deal with.

Mark K.
ditto, ordred 500 and all look concentric and top notch!

sha-ul 09-06-2010 12:22 AM
Quote:
Originally Posted by Hoser (Post 19946)
And for those looking for completed brass, I do have some once fired Lake City. $22 per 100 delivered.

If this offer is still good, I will be placing an order in a few weeks

Hoser 09-06-2010 10:46 AM
Quote:
Originally Posted by sha-ul (Post 23165)
If this offer is still good, I will be placing an order in a few weeks
Yup. The offer is still good. I have about two 5 gallon buckets of mixed headstamp brass.

Hoser 09-19-2010 04:41 PM
Still making brass for people.

I can tell you that a 5 gallon bucket of brass shavings is reallllly heavy...

sha-ul 09-19-2010 05:45 PM
Quote:
Originally Posted by Hoser (Post 23463)
Still making brass for people.

I did over 10K brass in Sept for various people and I also have a few thousand pieces on hand all ready to go.

I can tell you that a 5 gallon bucket of brass shavings is reallllly heavy...
on the bright side, those shavings should be worth what .25 per pound?:grin:

Spook 09-21-2010 10:53 PM
Just got my hands on some of Hosers brass , nicest Whisper brass I've ever laid eyes on.... and I've seen a bunch of the stuff. Bravo Hoser! :grin:

Wsinnett 09-26-2010 06:24 PM
Hoser is great at making whisper brass
 
Hoser,
I want to thank you for the great job you did making my whisper brass..
You were fast, honest and a great value.. when i bought my whisper that was the very thing I needed.. I want to thank you for the 3000 perfect rounds you made for me.. please keep me posted if you are moving or change your email... you are a blessing... also, I took a huge buck with the 300 subsonic bullet.. you did great... thanks, Bill Sinnett Blythewood SC
Airborne

Hoser 09-28-2010 09:25 PM
Quote:
Originally Posted by Hoser (Post 21585)
When you send me brass, please make sure you do the following.

1. Make sure it is clean.
2. No Berdan primers.
3. It has *NOT* been resized or processed.
4. Enclose a note telling me how to provide you a tracking number.
5. Let me know ahead of time that I have brass headed my way.

Dillon Trimmer Dies are also a resize die. If the case has already been resized, things go downhill in a hurry.
Just to make sure everyone is 100% clear.

Sized/processed brass will not work. The trimmer die I use needs to be able to hold on to the case while the trimmer blade does the work. If the case has been resized, the case just spins inside the die. If the cutter grabs on and tears off a big chunk of brass and locks things up, it will destroy a $250 Dillon trimmer motor.

I also need a way to contact you. Please put a note of some sort in the box...

sha-ul 10-08-2010 03:13 PM
the brass arrived yesterday, thank you very much

Hoser 10-08-2010 10:29 PM
Quote:
Originally Posted by Wsinnett (Post 23588)
Airborne
Freefall...


All times are GMT -4. The time now is 09:36 AM.
Page 4 of 16 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.