![]() |
Dang....a week late:grin:
|
Nothing like a good piece of brass.:grin: Thanks Hoser.
People, If you send in good clean 223 once fired brass.....You will get good clean whisper brass back!! :nanabang: Got my Hoser brass, now Im ready to start working up some loads finally. :sniper: |
Spent the past couple weeks getting caught up and ahead of demand.
Lots of brass in stock. |
Uncle Sam has decided to send me back to Texas for the fires.
If you have sent me brass and I have it today, I will get it done and turned tonight. Otherwise I will get it done as soon as I get back in town. That will be 1-2 weeks or as soon as the fires go out. Those of you in Texas, look for me in the C-130 with a big #2 on it. |
Im back.
The humidity came up a few points and the wind laid down a bit. http://d3.static.dvidshub.net/media/...394872_q75.jpg |
Hoser,
It's still plenty dry and very windy around here in North Texas. We definitely appreciate you guys in the C130s - wouldn't surprise me if you end up back here before too long. Unless we get some serious rain in the right places pretty quick it's going to be a very long summer. Great picture, by the way!!! Crawdaddy |
Quote:
I am dragging my feet getting the firefighting systems offloaded as they are a huge pain to on/offload. |
Just got my 2nd order of brass from Hoser. Excellent brass and quick turn time.
|
Got my order in the other day...nothing but good to say!! Was without a doubt, the easiest, fastest, mail order transaction I have ever done! I sure won't be making them one-at-a time anymore!
|
At present I have only one .300 Whisper - an Encore SS 12" T/C Custom Shop barrel that the previous owner ordered in .30 Herrett. I sent it to Mike Bellm in Grants Pass OR, who reamed it out to .300 Whisp-R improved.
Since my barrel already had the rim cut for its original cartridge based on the .30-30 Winchester, I have the option of using either .221 Fireball or .357 Rem Maximum brass to make .300 Whisp-R improved. I have been making them one at a time but it is slow. Mike Bellm recommends annealing the cases prior to resizing or they will split. Using .357 Rem Max brass does give a insignificant increase in case capacity but with sharper shoulders. http://www.bellmtcs.com/store/index.php?cid=570 My dies are from CH4D and are marked .300 Bellm - Whisper. http://www.ch4d.com/ Can I send .357 Rem Max brass and have it treated the same way as the other brass? |
All times are GMT -4. The time now is 04:03 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.