Quarterbore's Forums

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)
-   300 Whisper Ammo and Reloading (http://www.quarterbore.net/forums/forumdisplay.php?f=38)
-   -   velocity survey (http://www.quarterbore.net/forums/showthread.php?t=2421)

oobray 05-02-2009 01:19 AM

velocity survey
 
I have been doing a lot of searching for load data for the 300/221. I'm really considering getting in to this cartridge if...
What are my chances of getting a 240gr Sierra HPBT to move at 1200 to 1300 fps muzzle velocity? At the very least I'm looking to move it at about 1,100 fps out of the muzzle. What are my chances?

Rikky Lee 05-02-2009 07:23 AM

Do it far too easy with a 30BR - but I shall defer to the smaller case users...

dksd39 05-02-2009 11:06 AM

well its not the most practical use of a 240gr bullet in a 300/221- the concept is for that bullet to be subsonic. You will be far better off pushing a 125gr at around 2400fps then trying to push the 240- 1200.

just curious why would you want to do that with the 240?

Personally I use the 220 SMK. I go thru several thousand a year and save about $80 per 1K with the 220's over the 240's.

oobray 05-02-2009 02:52 PM

Well, here's the background. I have been using the "HITS" calculator on hornady's website. THis is supposed to take bullet characteristics and give reccomendations on size of animals these bullets would be good for. According to that the 240 moving at 1200 fps would be good for animals up to 1200 pounds, which the 125 at 2400 fps would only be good for animals weighing up to 500 lbs. I don't know if I'm every going to get the chance to shoot at something over 500 lbs, but I'm just trying to get a feel for the versatility of the 300/221.
However, recently I have started looking at some other "formulas" for predicting terminal ballistics and those are indicating that the 165 at 2000 fps would be better performing.

dksd39 05-02-2009 03:57 PM

I would not put too much stock in what that program has to say when it comes to a 300/221 or much else for that matter. There are much better programs out there that take into account far more factors and do a better job of predicting perfomance. The hits program shows a 240 at 1050fps good for large game with a 910 rating. That said you can kill large game using a 22lr with proper shot placement and maybe a little luck.....and thats exactly what you would need if using a 300/221 with a 240. When using a slow moving 240 bullet (any subsonic) there is no expansion on impact. The bullet is simply going to pass right thru the animal. So unless you hit the spine or brain a fast kill is not going to happen. A heart lung shot can result in a lost animal due to the limited damge done. On the other hand a 125 will work considerably well and is a far better choice if not hunting suppressed.

oobray 05-02-2009 08:01 PM

That seems to be what I'm learning. Thanks for the input. I happen to have a whole bunch of 165 gr sierra HPBT that I was using for my 308. What do you guys think about those?

dksd39 05-02-2009 09:45 PM

have never tested them- I would guess you should be able to push them between 1800-1900

pug 05-03-2009 01:15 AM

I have never had a need to push a 240 that fast in 300/221 but I did run the load program using a 240gr sierra and h110. For a 85% density powder load it shows a velocity out of a 16" barrel of 1199 fps with a chamber pressure of 50,000 CUP. The powder charge indicated is 8.9gr of H110. Since this is simulated data I have no way of knowing what it will actually do in your firearm. It is for informational purposes only. Unfortunately the program can't use AA1680 as a powder and that is what I would use if I was trying to push a 240 to maximum velocity in 300/221. You can also get the highest charge density using 1680 and get lower chamber pressures as well. Too bad I don't have any 240s on hand or I would let you know tomorrow just how fast 1680 will push them :smile:.

Rikky Lee 05-03-2009 06:23 AM

Try the 180 - 185 grainers at supersonic. In my 30BR they hammer and have shot sub MoA recorded out to 300.

320pf 05-03-2009 10:33 AM

240 Mk
 
Here are the reloading data from the Sierra Reloading manual

Powder /Velocity---950--1000--1050--1100--1150--1200
AA-No.9-------------9.2---9.5---9.9----10.2---10.6---11.0
2400-----------------9.4---9.8--10.2---10.6---11.0---11.3
Viht N110-----------8.9---9.3---9.7----10.1---10.5------
H110----------------9.6--10.0--10.4----10.8---11.2---11.5
296------------------9.3---9.7--10.1---10.5---10.9----11.3
Viht N120----------10.5--11.0--11.5---12.0---12.5------
AA-1680------------11.2--11.6--12.0---12.4---12.8---13.3

These data were shot from a 10-inch barrel T/C Contender. A 16-inch barrel will add about 150 to 200 fps to these muzzles velocities.

I have shot 180 gr Sierra MKs and GKs using several different powders and have gotten max muzzle velocities from 1780 to 1800 fps.

If you want to check out my load go over to Reloaders Nest. Most of the loads listed under "Not yet verified user loads" are mine. The loads that are not mine are the one that list Vitha N110 powders AD2205. There might be one other load listed there that I did not shoot....

320pf


http://reloadersnest.com/frontpage.asp?CaliberID=135


All times are GMT -4. The time now is 07:00 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.