Quarterbore's Forums

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)

- The .257 Cartridge Rifles and uses (http://www.quarterbore.net/forums/forumdisplay.php?f=55)

- - 25 ppc (http://www.quarterbore.net/forums/showthread.php?t=202)

300whisper_newbie

12-14-2004 08:49 PM

25 ppc

250sav Wrote :

Quote:

any info available on the 25 ppc. ?? Apparantly a necked down 7.62x39 (an AK round).

300whisper_newbie

12-14-2004 08:50 PM

BulletPusher Wrote :

Quote:

The .25PPC is a new one on me. I've often though that a short case in a 25 caliber would take the bench rest shooting by storm. I considered every thing from the 250 Akley Improved to the 25 souper, and my .25-06.

You've gotten my interest with the .25PPC.

If you or anyone else comes up with any information please let us know.

Tracker

02-23-2008 03:23 AM

It takes about 8 weeks to make any wildcat you can dream up.
$145 for a reamer and $120 for dies. $525 for a Krieger.

seahawkkid

07-17-2010 04:26 PM

25 Ppc

I just joined this forum
Is anybody shooting the 25PPC that would care to share Info
Alan N NV

Rikky Lee

07-21-2010 02:53 AM

I've read that it has been done, like the 25 BR which would be better for the heavier bullets, but they don't seem to offer more performance than their 6mm parents.

seahawkkid

07-21-2010 11:31 AM

I started using the about 10 years or so ago in the TC Contender 14" barrel,
now am using it in a 15" TC Encore barrel.
Shooting it in the IHMSA game with the 117g bullet it will take the metal rams over at 200m, but yet not do any damage to the target.
Have been using Lupa brass and H4198 powder.
I was just wondering if anybody else was using it.
Thanks

All times are GMT -4. The time now is 11:57 PM.