Need Flash Hider/Muzzle Brake
 

i'd like to find a flash hider or muzzle brake for my ar's that are threaded with 5/8-24 tpi. anyone know a source of 30 cal threaded or blank for threads fh or mb's??

You can buy the OPS Inc. R3E2C ready to go for $133 or a Shrewd Precision you will need to drill the exit hole $69 both SS and available from Brownells. The Harrel brothers here in Virginia were making custom ones for $30 and you finish but you will have to check their website for current status.

Depends what dia brl. For a .930 I would look at the DPMS 308 FH($45) & an A2 for the .750($30). They are threaded 5/8x24.
For $15 PK has the RRA A2 FH(.750dia) that is for the 6.8SPC & it is 5/8x24. I can open it up for you for free if you go that route. I just opened one up for a 40cal I have.

GPZ1100
Are you not running (going to run) a can on it?
If so go ahead & buy FH from can manufacturer so you do not have to buy another one.
If NO can intended get a Smith Vortex!
They are FABULOUS!
Had one on my .223 AR that I sold to a good friend whose son is in US Military in Korea.
He sent it to his son to put on his gun.
Understand it was recently used to shoot a North Korean that was spying on our troops.
NK was not in uniform but had AK!
One NK was shot & one NK was captured. Nothing in the press!

usually suppressed. can't hunt with it though. figured use a flash hider 'stead of a thread protector.

gonna get the dpms. found one for $20.

Is your can thread on or QD?

i went thread-on. there are 6 hosts.

understand!
The Smith Vortex is unbelievable especially on short barrels.