Quarterbore's Forums - M9A1 scabbard stops

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)

- Phrobis M9 Bayonet Topics (http://www.quarterbore.net/forums/forumdisplay.php?f=7)

- - M9A1 scabbard stops (http://www.quarterbore.net/forums/showthread.php?t=1925)

WILKIE

06-01-2008 09:33 PM

M9A1 scabbard stops

Does anyone have a photo comparison of the short and high scabbard stops on the M9A1? How about height dimensions?

Carlo

06-02-2008 04:44 AM

Hi,
the following picture could give you an idea about the difference between the two stops
http://img15.imageshack.us/img15/1336/18na.png.
The lower stop is the one at the top of the picture.
As far as I know, you could find the M9A1 in green and black color with both the lower and the higher stop.
Instead, the M9A1 in tan color was made with the higher stop only.
Hope this helps!

WILKIE

06-02-2008 08:58 PM

Thanks!! Exactly what I needed to see. Could I have the height dimensions ? I know one is .250 (1/4").

Carlo

06-03-2008 06:20 AM

Quote:

Originally Posted by WILKIE

Thanks!! Exactly what I needed to see. Could I have the height dimensions ? I know one is .250 (1/4").

Hello!
I'm moving from my house and all my M9 bayonets are packed away and not easy accessible :frown:
I'll try to take the measurements requested as soon as possible, but then I'll need to convert my metric system (millimiters) to yours (inches).
Perhaps a fellow US collector could be quickier.....

All times are GMT -4. The time now is 07:33 AM.