Quarterbore's Forums

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)
-   300 Whisper Rifles and Pistols (http://www.quarterbore.net/forums/forumdisplay.php?f=37)
-   -   "Do all" 10.5" barrel? (http://www.quarterbore.net/forums/showthread.php?t=1769)

Pitt300 04-27-2008 03:05 PM

That's good velocity!
Only about 160 fps loss for a 5 1/2 inch shorter barrel.
NICE trade off!
30 fps/" loss/gain
Thanks

AlcoholicusMaximus 04-28-2008 01:34 AM

Using Remington 125gr sp & 17.5gr H110 - 2002 2014 2048
Oal 1.946" cci 450 18gr H110 - 2099 2020 2038
The copper on these bullets is very hard.
JFettig, how did you determine that the 18.5 load was too hot? Primers?Pressure ring? Recoil?Gouged brass?
I have not done any accuracy testing yet,but I am crossing my fingers on these Rem 125's, this was the only bullet that failed to feed one time.

JFettig 04-28-2008 02:23 AM

I don't recall seeing a pressure ring but the radius on the primer was gone, completely flattened out. There was virtually no velocity increase between the two loads.

Jon


All times are GMT -4. The time now is 08:30 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.