![]() |
Any Thompson Contender 300 Whisper users here?
I am curous if there are any T/C Contender users that are dropping in here? I would also be curious to know if you are using a T/C barrel or an SSK barrel and what length barrel you use and what twist rate...
I am also curious if anybody has used one to hunt (especially big game)? If so, have you managed to get anything with it and how did the bullet perform? What loads were you using? |
Jripper Wrote :
Quote:
|
Garrett Wrote :
Quote:
|
Doug0046 Wrote :
Quote:
|
JF Wrote :
Quote:
|
Quarterbore Wrote :
Quote:
|
JF Wrote:
Quote:
|
Here's my entry:
G2 Contender carbine with 16.5 inch SSK 1x8 twist barrel, Leupold 3.5x10x50 Illum MilDot, and AAC Cyclone suppressor. I did the stock with Brownells spray grit just on the grip and part of the forend, then coated it in Flat black Alumahyde. And here is the finished product. Is there any such thing as a "Tactical" Contender? :mrgreen: http://www.hunt101.com/img/319226.jpg |
.300 Whisper
I have an 18" SSK barrel. I have had it for around 3 years and have put an eask 1000 rounds through it. It shoots everything from 125s at 2300 to subsonic 220's. Cast 220's with 2400 @1000fps are a great plinking load.
|
T/C carbine
I'm patiently waiting for my T/C carbine to come back from the Smith's to find out if I own a lemon or not. I have a SS version with 1-8' VVCG barrel, 6 screw mount VVCG ss scope base, leupold QRW rings, leupold 2.5-8x36 vX3 scope & lightweight Gunworks suppressor. I'm hoping for a real shooter as the rifles previous owner was suppossed to be getting 1" 200yard 5 shot groups. So here's hoping!
|
All times are GMT -4. The time now is 03:22 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.