Lee Collet Dies for sale
 

I have a limited run of 25 sets of Lee Precision AAC 300 Blackout Collet Dies. They will be $45 shipped to the CONUS. They come with collet die, seating die, powder measure and shellholder. I take cash, Money Order, PayPal, or Credit card over the phone. Please PM or email at echoarmsATyahooDOTcom.

There is no loading system that will load more accurate ammunition than Lee Collet Dies. No one but Lee has ever dared make a guarantee like this -- Smallest group size or your money back. A collet squeezes the case neck against a precision mandrel for a perfect fit with minimum run-out. No lube case is needed. Cases last ten times longer, so the savings on only 35 cases will pay for the dies. Maximum accuracy is usually achieved by seating the bullet out far enough to touch or almost touch the rifling. This provides the shot start pressure normally supplied by the crimp. That's why a dead length bullet seater is included to complete the most accurate reloading system ever made. These dies size only the neck to preserve the perfect fit of fire forming. Only reload cases that have been fired in your gun. Not recommended for autoloaders, slide or lever action guns.
http://www.wileyoutdoorsports.com/pr...-DEFAULT-l.jpg

Price drop

You might mention what cartridge these are for.
300W
300blk
300 fireball?

Omg. How dumb am I. 300 BLk

Have you used these with your bolt gun in 300WTF? I HATE brass lube. I have a set for my 223AI and love them.

I have 2 single shot 300BLK and use them for both. No lube.

If you have any more of these, how do I get a set on the way?

Send me a PM and i will respond with payment options.

are you saying you don't have to use case lube to form these?

I got a set from another source, I have other dies, I got these b/c I exlusively load the Lee TL 230 blackout boolits. the tumble lube / wax galls up my other seater dies, the LEE design seems better and easier to clean than the other dies (hornady and redding) BUT I had to cut the bullet seating stem <1/4 " b/c the boolits are so long that there was only a thread holding it down.
also the decapping die seems to do something weird to the case mouth, I am cutting all of the brass to 1.363" . it looks like it buckles them, but not really it just leaves a strange wrinkle, but however it is just cosmetic. the boolits load fine and they all chamber in my Model1Sales .300 Whisper.

These are neck sizing dies only. They don't form brass. Because of the ways these dies work, they don't require lube.