What is the 25-223

[sha-ul]

Since we have this shiny new sub-forum, perhaps someone can give me a thumbnail sketch about these wildcats, and kick start the conversation.

[tp555]

Since we have this shiny new sub-forum, perhaps someone can give me a thumbnail sketch about these wildcats, and kick start the conversation.

Its a 223 necked up to 25.Guy here sells them and i have made a few.

[320pf]

This forum was started by my request but I on vacation at about the time that this forum was started and did not have a chance to get any thing posted.

So here is a repost with some additional material that describes the various 223 Rem based 25 cal. wildcats.

There are three variants/wildcats based on the 223REM/5.56x45 case. Some will fit in an AR15 mag better than others. The 25x40 has the shortest case. It goes by the name 25x40mm. It was designed be Kurt. His handle on AR15.com is 7.62x40mm, his first creation. He also post on occasion here on quarterbore. The 7.62x40mm is now being offered by Wilson Combat. Basically, it is a 223REM case shortened to 40mm and the shoulder pushed back. This reduces the case capacity to about 28-29 g of water. The 25x40mm designed is such that you can load bullets up to 115 g Bergers. The case mouth will not ride up on the ojive of the bullet and will fit the 2.26 length restriction of an AR15 mag. The 25x40mm is very similar to the John Wooters 25 Copperhead.

The second 25 cal 223REM/5.56x45 based wildcat is the one I designed with advise from Kurt. It goes by the name of 25-223AR. It has the same shoulder as the parent case but the neck is shortened about 0.06" giving an overall length of 1.70". This cat was designed for 25 cal bullets up to 100 g without the case mouth riding up on the ojive of the bullet and still fit within the 2.26" length restriction of an AR15 mag. I have been able to push 100g bullets to 2550-2600 fps (16-inch barrel).

Various people including myself have been able to push some load to 2650 fps with some combinations of 100 gn bullet and powders, but as with all internet reloads… You are on your own Start low and work up..You must use your own judgement if the loads are safe in your gun/barrel combination. The heaviest bullet that will fit in 2.26 length restriction of an AR15 mag is the 117 gn Hornaday round nose bullet and the 117 gn Sierra GK. I have pushed these bullets up yo 2400 fps. The Hornaday 117 RN runs through my ARs quite well. The 117 g Hornaday bullet is designed for the Winchester 25-35 so 2400 fps is right in the velocity envelope for this bullet.

The third 25 cal 223REM/5.56x45 based wildcat is here on this site under a different forum. It's main advantage is that it is simple to make brass. Run it through a 25-223 Rem die and you are good to go. Because of the longer case neck however, you will have a lot fewer bullets to choose from without the case mouth riding up on the ojive of the bullet.

If I recall correctly, there is also an cat based on the 223 Mag. I believe that "Blackwell???" wrote this up in one of the gun rags several years ago. I think that it was named the 25x47mm.

I have a copy of the original article for both the 25 Copperhead and 25x47mm. I will try and locate them and update the information on these two cats.

[sha-ul]

So I take it these should all make goof defensive carbine& medium game hunting, including Deer. All while functioning in a semi auto.

[320pf]

So I take it these should all make good defensive carbine & medium game hunting, including Deer. All while functioning in a semi auto.

Yes, I can vouch for the 25-223AR; From a 24 inch barrel, the 25-223Ar will run pretty darn near head-to-head with a 250-3000 Savage. The SAAMI spec for the 250-3000 Savage is 45000 c.u.p. and the 5.56/223Rem is spec'ed at 52000 c.u.p., which makes up the difference in case volumes.

[Quarterbore]

This would also make a dandy varmint cartridge. I have lots of experience with the 257 Roberts and 25-06 with the 85gr Nosler Ballistic Tip bullets. These bullets explode quite wildly with the 2506 such as to make a fur tube out of a groundhog. With the 257 it still makes chunks and these velocities are not much behind the 257.

I have watched this round and it's something I would like to experiment with too, I just need a life change so I can get to the range more! Someday soon perhaps?

[320pf]

This forum was started by my request but I on vacation at about the time that this forum was started and did not have a chance to get any thing posted.

So here is a repost with some additional material that describes the various 223 Rem based 25 cal. wildcats.

There are three variants/wildcats based on the 223REM/5.56x45 case. Some will fit in an AR15 mag better than others. The 25x40 has the shortest case. It goes by the name 25x40mm. It was designed be Kurt. His handle on AR15.com is 7.62x40mm, his first creation. He also post on occasion here on quarterbore. The 7.62x40mm is now being offered by Wilson Combat. Basically, it is a 223REM case shortened to 40mm and the shoulder pushed back. This reduces the case capacity to about 28-29 g of water. The 25x40mm designed is such that you can load bullets up to 115 g Bergers. The case mouth will not ride up on the ojive of the bullet and will fit the 2.26 length restriction of an AR15 mag. The 25x40mm is very similar to the John Wooters 25 Copperhead.

The second 25 cal 223REM/5.56x45 based wildcat is the one I designed with advise from Kurt. It goes by the name of 25-223AR. It has the same shoulder as the parent case but the neck is shortened about 0.06" giving an overall length of 1.70". This cat was designed for 25 cal bullets up to 100 g without the case mouth riding up on the ojive of the bullet and still fit within the 2.26" length restriction of an AR15 mag. I have been able to push 100g bullets to 2550-2600 fps (16-inch barrel).

Various people including myself have been able to push some load to 2650 fps with some combinations of 100 gn bullet and powders, but as with all internet reloads… You are on your own Start low and work up..You must use your own judgement if the loads are safe in your gun/barrel combination. The heaviest bullet that will fit in 2.26 length restriction of an AR15 mag is the 117 gn Hornaday round nose bullet and the 117 gn Sierra GK. I have pushed these bullets up yo 2400 fps. The Hornaday 117 RN runs through my ARs quite well. The 117 g Hornaday bullet is designed for the Winchester 25-35 so 2400 fps is right in the velocity envelope for this bullet.

The third 25 cal 223REM/5.56x45 based wildcat is here on this site under a different forum. It's main advantage is that it is simple to make brass. Run it through a 25-223 Rem die and you are good to go. Because of the longer case neck however, you will have a lot fewer bullets to choose from without the case mouth riding up on the ojive of the bullet.

If I recall correctly, there is also an cat based on the 223 Mag. I believe that "Blackwell???" wrote this up in one of the gun rags several years ago. I think that it was named the 25x47mm.

I have a copy of the original article for both the 25 Copperhead and 25x47mm. I will try and locate them and update the information on these two cats.

There is another 223 Rem base wildcat based on the .256 Winchester Magnum. I believe Marty of Teppo Jutsu came up with this one. As I understand it, you run a 223 Rem case into a standard .256 Winchester Magnum die and trim to length. Thisis basically a rimless .256 Winchester Magnum.

The Hodgdon reloading manual list load data for the .256 Winchester Magnum. Given that the SAAMI pressure spec is only 50000 psi (~40000-45000 c.u.p.), the Hodgdon data can be used as a good starting point. Based on the data in the Hodgdon manual, I would guess that seating an 87 gn bullet out to AR mag length, the velocity potential would be ~2500 to 2600 fps.

Can anybody think of any others?

[320pf]

This would also make a dandy varmint cartridge. I have lots of experience with the 257 Roberts and 25-06 with the 85gr Nosler Ballistic Tip bullets. These bullets explode quite wildly with the 2506 such as to make a fur tube out of a groundhog. With the 257 it still makes chunks and these velocities are not much behind the 257.

I have watched this round and it's something I would like to experiment with too, I just need a life change so I can get to the range more! Someday soon perhaps?

I hate to point to other forums but here is a confirmed 721 yrd pdog kill.

http://www.ar15.com/forums/t_3_121/499109_25_223.html&page=50

[sha-ul]

I hate to point to other forums but here is a confirmed 721 yrd pdog kill.

http://www.ar15.com/forums/t_3_121/499109_25_223.html&page=50

that was with the 25-223? impressive.
Savage 3screw target action?

[Quarterbore]

I hate to point to other forums but here is a confirmed 721 yrd pdog kill.

http://www.ar15.com/forums/t_3_121/499109_25_223.html&page=50


Never worry about posting links elsewhere --- other forums, ebay, craigslist, etc! As long as it is relvant to a discussion links are fine. Spam links, well those may get a member banned and then they will need to beg forgivness to get back in.

[tammons]

that was with the 25-223? impressive.
Savage 3screw target action?

AFAIK its a normal Savage action.
No nut 23 1/4" long 1.25" diameter Lilja on a Savage action, with a Bell and Carlson stock (Looks like a medalist) and a Leupold VXIII

Here is his rig down the page a bit - DK223
http://www.ar15.com/forums/t_3_121/499109_25_223.html&page=47

[sha-ul]

AFAIK its a normal Savage action.
No nut 23 1/4" long 1.25" diameter Lilja on a Savage action, with a Bell and Carlson stock (Looks like a medalist) and a Leupold VXIII

Here is his rig down the page a bit - DK223
http://www.ar15.com/forums/t_3_121/499109_25_223.html&page=47

Cool, thanks for the info. btw :welcome:

[tammons]

I am thinking about building one as we have a 223 savage.

Either that or a 308 arrow, 7mm TCU, 6.5 TCU. Still have not decided
yet.

It will mostly be for hogs so bigger bullet the better.

I really think a 300 Arrow loaded with the 300 blk 110 gr TTSX would be the best out to about 200 yards. Big hole.
Then again I can get a 308 barrel for cheap so....

Also been considering a 8mm-223.

I just have 3k in 223 brass that needs a load.

That said the 25-223 is a really nice round.

[sha-ul]

Well, the great thing about building on a Savage action, is that all you will have to do is swap barrels for this puppy.
I almost want to build one now. :D don't have time to shoot what I already have. :(