Log in

View Full Version : 300 Whisper Advice


geichal
04-03-2006, 05:56 PM
:uzi2: Hello all!
I am planning on building an AR-15 in an adult caliber (not a .223 fan), I think I have decided on the 300 Whisper. I won't be shooting suppressed, so I am only interested on full power loads (yote killer!). Couple of possibly stupid questions: Will a .223 bolt work? Mags? Best source for barrells and flash hiders? What twist for full loads w/110-125 grain bullets?
Thanks in advance!
geichal

Wrangler
04-03-2006, 07:32 PM
How big a "yote" you planning on shooting? I have been using a 17 HRM.... Works great.

geichal
04-03-2006, 10:48 PM
I usually use a .308 w/110 grainers @ 3000fps. Takes them out real well & never needs a 2nd shot. It does however make a mess of the hides!
geichal

Wrangler
04-03-2006, 10:51 PM
I'll bet it does but then if you are not interested in the hide I guess it doesn't matter that much. Kind of like exploding dog, huh? Ever tried trapping them? The bolt should work if you use a matching cartridge face. There is a limit to what an AR15 will hold up to you might want to go to an AR10 for a beefier receiver and a bigger case like 308.

geichal
04-03-2006, 11:00 PM
Nope, that would be to much like work. I just like to shoot them! That's why I think the .300 would be great! Not quite so much overkill, well maybe a little.
geichal

geichal
04-03-2006, 11:03 PM
I'm not a real fan of the AR10. I've got a few guys that bring Armalites to my range and everyone of them seems to finiky about what they eat.
geichal

Wrangler
04-04-2006, 09:01 AM
I prefer medium sirloin myself but then I am considering a whisper AK.

geichal
04-04-2006, 01:12 PM
I think I've about got it figured out what I'm going to do. I still would like to find a 20" barrel, everything that I've found so far is 16".
geichal

Wrangler
04-04-2006, 08:44 PM
20 inch barrels will burn a bit more powder and may reduce flash and awe some. I am sure you will find one. Maybe Quarterbore will give you some info on where to find a barrel.

geichal
04-06-2006, 09:58 PM
I just ordered a barrel (16") from Del-Ton today, now for brass and dies. I'm getting more exited the more I read!:grin:
geichal

prebancolt
04-07-2006, 01:49 AM
Tony's a great guy who offers a good product at a good price. You won't go wrong dealing with him.

J

geichal
04-13-2006, 11:24 PM
I've got most of the gun together (scope mounts and trigger group due in tommorrow), powder, 1,000 primed cases, 5 differant kinds of bullets. Dies should be in tommorrow. Hopefully, I'll be shooting this weekend!
geichal