View Full Version : Barnes X 110
SwampF0X
06-12-2011, 03:07 PM
Anyone got some supersonic load data for the 300 BLK using Barnes X 110gr bullets? The faster the better velocity wise.
thanks,
swampf0x
rsilvers
06-12-2011, 05:03 PM
H-110 powder. I am not sure how much.
Spook
06-12-2011, 07:41 PM
I have whisper data with Barnes tsx w/ VVN 110 @ 19.0
YOU SHOULD START 10% LOWER IN POWDER WEIGHT AND WORK UP.
I never got consistent velocities using H-110 sub or super :mad: needless to say its not one of my fav's.
SwampF0X
06-12-2011, 10:15 PM
I have whisper data with Barnes tsx w/ VVN 110 @ 19.0
YOU SHOULD START 10% LOWER IN POWDER WEIGHT AND WORK UP.
I never got consistent velocities using H-110 sub or super :mad: needless to say its not one of my fav's.
How accurate is your setup with that load and do you know your fps? Or better yet, what velocities can I expect to achieve using this data from my 16" barrel?
Also, where can I find a heavier buffer for my AR for shooting this load? My gas port is in the pistol position.
I'm wanting to use this for deer hunting this fall. After that I'll be ready to get my suppressor and start hunting quietly :D
swampf0x
rsilvers
06-12-2011, 11:11 PM
If you want to be conservative, 2375 fps is what Hornady gets with 110 grain bullets.
If you have a real Blackout chamber - 2400 is conservative and 2450 is max.
This is assuming you are not seating the bullet super deep.
SwampF0X
06-13-2011, 10:11 PM
I DO have a BLK chamber. :D What should my OAL be with this bullet? Keep in mind I'm using AR mags.
thanks,
swampf0x
rsilvers
06-13-2011, 10:37 PM
2.1 at most. 2.050 at least.
SwampF0X
06-13-2011, 11:48 PM
Is there any particular brand of primers I should use?
thanks,
swampf0x
rsilvers
06-14-2011, 09:10 PM
No, but if you change primers you need to reduce the load and work it up again.
SwampF0X
06-15-2011, 07:22 PM
Will a 1:8 twist stabilize the 110gr bullet?
thanks,
swampf0x
rsilvers
06-15-2011, 08:00 PM
Yes.
Any twist will work.
SwampF0X
06-22-2011, 07:43 PM
Thanks for the help guys. I don't suppose anyone has a trajectory chart for this load?????
100yrd zero
scope 2" above the bore
110 grain Barnes X
2400fps
3000' elevation
thanks,
swampf0x
SwampF0X
06-22-2011, 08:44 PM
Found it.
Range Velocity Impact Drop ToF Energy Drift
0 2400 -2 0 0 1407 0
10 2365 -1.5 0.06 0.02 1366 0.44
20 2336 -1.07 0.18 0.03 1333 0.49
30 2307 -0.69 0.36 0.04 1300 0.56
40 2278 -0.39 0.61 0.05 1268 0.66
50 2250 -0.14 0.92 0.07 1237 0.79
60 2222 0.04 1.3 0.08 1206 0.94
70 2194 0.13 1.76 0.09 1176 1.13
80 2166 0.17 2.28 0.11 1146 1.34
90 2138 0.12 2.88 0.12 1117 1.59
100 2111 0 3.56 0.14 1089 1.87
110 2083 -0.19 4.31 0.15 1060 2.17
120 2056 -0.48 5.15 0.16 1033 2.51
130 2029 -0.84 6.07 0.18 1006 2.88
140 2003 -1.29 7.07 0.19 980 3.29
150 1976 -1.82 8.16 0.21 954 3.73
160 1950 -2.44 9.34 0.22 929 4.2
170 1924 -3.16 10.61 0.24 904 4.71
180 1898 -3.97 11.98 0.26 880 5.25
190 1872 -4.88 13.44 0.27 856 5.84
200 1847 -5.88
vBulletin® v3.8.4, Copyright ©2000-2016, Jelsoft Enterprises Ltd.