View Full Version : Rifle build, need advice
goshinkaibushi
03-09-2011, 12:21 PM
OK... I want to build a bolt gun in 300BLK. It is between the Savage 10FP LE or Remmy 700 SPS Hogue as the base gun.
Who is making tubes for the Savage? I know AAC and others are making Remmy tubes.
Where can I find just the actions and put this together piece by piece?
Thanks!
Justin
i8asquirrel
03-09-2011, 12:25 PM
Contact a gunsmith. Mine in Salem Ore. built mine using a PTG reamer.Works great! then you can order what ever barrel and twist rate you want take it to them and your set!!:smile:
ds762
03-09-2011, 12:59 PM
+1 to the above. Spook here on the forums is well respected and does good work. I'd suggest contacting him.
OR
you could order a Remington factory SD model which has been engineered and drawn to spec by NASA, made by master machinists who practice voodoo
BWE Firearms
03-09-2011, 03:54 PM
Now wait just a dam minute. I thought only gunsmiths were licensed to practice voodoo when it came to firearms.
Before you decide on an action look at the Weatherby Vanguard(Howa 1500). It is a much nicer action and cheaper.
[QUOTE=ds762;27647you could order a Remington factory SD model which has been engineered and drawn to spec by NASA, made by master machinists who practice voodoo[/QUOTE]
goshinkaibushi
03-09-2011, 04:29 PM
Now wait just a dam minute. I thought only gunsmiths were licensed to practice voodoo when it came to firearms.
Before you decide on an action look at the Weatherby Vanguard(Howa 1500). It is a much nicer action and cheaper.
Are aftermarket barrels easily installed on the HOWA?
Thanks for the info, guys.
It's the voodoo that we do...
Justin
N310toN170
03-09-2011, 06:46 PM
Mainly based on superstition and religious preference I've settled in on a Remington 700 action. (It's what I know and love as well as have plenty of spare parts); That coupled with the fact that they're now offering a $75 mail in rebate on the purchase of an SPS Varmint:
http://www.remington.com/pages/news-...eRoundup1.aspx
BWE Firearms
03-09-2011, 07:42 PM
I find it easier to rebarrel a Howa then a Remington because you don't have to worry about keeping the recoil lug straight. I don't know why but the Weatherby Vanguard is cheaper then the Howa.
rsilvers
03-09-2011, 08:13 PM
Yes, it is a pain. I scribe a mark to use a a reference, but someone who does more than a few should get a tool:
http://www.midwayusa.com/viewProduct/?productNumber=516735
http://ustacticalsupply.com/recoillugalignmentfixture.aspx
Code_4
03-09-2011, 10:22 PM
edit...wrong thread
i8asquirrel
03-09-2011, 11:49 PM
http://img97.imageshack.us/img97/6291/300blackoutrifle.th.png (http://img97.imageshack.us/i/300blackoutrifle.png/)
this is my Vanguard / Howa
Titleiiredneck
03-10-2011, 02:13 AM
Yes, it is a pain. I scribe a mark to use a a reference, but someone who does more than a few should get a tool:
http://www.midwayusa.com/viewProduct/?productNumber=516735
http://ustacticalsupply.com/recoillugalignmentfixture.aspx
But tools dont always work when you use a aftemarket lug, also the wrench with the built in lug recess is crap on keeping it straight. Just sayin..
Hoser
03-10-2011, 11:46 AM
I use the Kleinendorst tool on my switchbarrel 300 WTF/223 Ackley.
http://www.brownells.com/.aspx/pid=7653/avs%7CManufacturer_1=KLEINENDORST/Product/REMINGTON_700_BARREL_TOOL
vBulletin® v3.8.4, Copyright ©2000-2016, Jelsoft Enterprises Ltd.