keith__davis
05-22-2005, 12:47 AM
I have 300 whisper brass made from once fired .223 remington brass, its remington brass all same lot, it has been trimed (1.35 or 1.39 or what ever you want), sized, de-caped (non-crimped primer pockets) and polished to a high luster, and ready to ship.
1000 to your door for 120.00
1000 primed with winchester small rifle primers to your door for 145.00
can do orders less than a 1000 just drop me a note
with so many different guns out there samples are always free, to ensure your happy before placing a order
keith__davis@yahoo.com
Trim lenght: SSK calls for 1.355, most others (AR15barrel.com, Olympic Arms, Model 1, double star, T/C custon shop, Bull berry) call for 1.390 I have found the longer neck give more support to those heavyer bullets and better preformance, i have fired my brass in all the above named companies barrels and i have found that 1.39 trim lenght works best, but with SSK you do need 1.35, if your not sure check with a local gunsmith and have him do a cast of your camber.
Neck thickness: I did at one time use military once fired brass but i did have some neck thickness troubles, i use only commerical once fired brass as to date i have yet to have any problems with any of the above name makers of uppers and barrels using commercal brass.
1000 to your door for 120.00
1000 primed with winchester small rifle primers to your door for 145.00
can do orders less than a 1000 just drop me a note
with so many different guns out there samples are always free, to ensure your happy before placing a order
keith__davis@yahoo.com
Trim lenght: SSK calls for 1.355, most others (AR15barrel.com, Olympic Arms, Model 1, double star, T/C custon shop, Bull berry) call for 1.390 I have found the longer neck give more support to those heavyer bullets and better preformance, i have fired my brass in all the above named companies barrels and i have found that 1.39 trim lenght works best, but with SSK you do need 1.35, if your not sure check with a local gunsmith and have him do a cast of your camber.
Neck thickness: I did at one time use military once fired brass but i did have some neck thickness troubles, i use only commerical once fired brass as to date i have yet to have any problems with any of the above name makers of uppers and barrels using commercal brass.