Project Savage 112 in 300-221 Fireball

[nfa-user]

I finally got my Savage barrel wrench Friday and could finally get to work on this project. Here are a few pictures I took as I progressed. Now I just need my reoading dies I have on backorder. :mad:

Barrel is 13.5" with a YHM QD flash hider that is perm attached to bring it to 16.25" overall length.

I will also engrave the barrel with the caliber. It will get finished in Dura-Coat ACU pattern. I'll update this thread as I get more done.

Barrel blank worked down so the profile is true to the bore, final size was 1.050". http://members.cox.net/randy3gun/300-221fireballprojects/savage/DSC01104a.jpg

Receiver threads cut 20 TPI.
http://members.cox.net/randy3gun/300-221fireballprojects/savage/DSC01105a.jpg

Muzzle cut to correct dia for 5/8" threads.
http://members.cox.net/randy3gun/300-221fireballprojects/savage/DSC01106a.jpg

Threaded 5/8"x24
http://members.cox.net/randy3gun/300-221fireballprojects/savage/DSC01107a.jpg

YHM 308 QD screwed on.
http://members.cox.net/randy3gun/300-221fireballprojects/savage/DSC01108a.jpg

Left side, assembled
http://members.cox.net/randy3gun/300-221fireballprojects/savage/DSC01109a.jpg

Right side, assembled
http://members.cox.net/randy3gun/300-221fireballprojects/savage/DSC01110a.jpg

Finished for now, barrel got a quick coat of paintplating (just to keep the barrel from rusting).
http://members.cox.net/randy3gun/300-221fireballprojects/savage/DSC01111a.jpg

[Colohunter]

Looks good, let us know how it shoots when you get your dies.

[Fritzcat]

That looks awsome, which blank did you use? I have a Savage 223, Rem 223, and a Victor 16x40 thats waiting on me, and I am waiting on funds. I guess I can dream and druel over this. Keep us posted on results, I am thinking the same as you, short barrel and pin my QD.

[Spook]

Nice work. Really like the flash hider idea!