Log in

View Full Version : .300 Whisper AR Build


biggmac1
03-03-2010, 10:31 AM
So I'm in the midst of doing a .300 Whisper build on an AR platform. I just received my Noveske 16" barrel (pistol gas position) and am planning to primarily shoot 220gr or 240gr subsonic loads.

What bolt carrier group (F/A or Semi) and buffer combination will work best?

alorton
03-10-2010, 02:21 AM
Bolts are the same for full auto or semi auto so I assume you mean the carrier. My 300FB uses a semi-auto carrier and a standard carbine buffer. I posed a similar question when I was researching prior to building mine and the consensus seemed to be not to mess with carrier and buffer weight. That is what I went with and it has worked well for me.

biggmac1
03-11-2010, 08:01 PM
Thanks for the reply. Much appreciated.

winmdl98
03-12-2010, 02:10 AM
I posed the same question. I have the 10.5" version and this was the response I received:

The carrier can be semi or auto. You should use a standard carbine buffer and spring for subs, you might want to try an H2 with supersonic.

Todd Krawczyk
Noveske Rifleworks LLC
P.O. Box 1401
Grant Pass OR 97528
541-479-6117
Fax 541-479-2555
www.noveskerifleworks.com

Two different friends are using 1) a JP low mass carrier and the other 2) is useing a modified spring, however, I think both of them have carbine length gas system.

Hope it helps.

Garrett
03-12-2010, 11:56 AM
And I've had excellent results with my 16" Noveske barrel using an A1 buffer tube and a standard rifle buffer with a semi-auto carrier.