Log in

View Full Version : Getting ready to order SSK


AC17
01-16-2009, 11:59 AM
Going to order today, this is what I'm going to request. Any suggestions before I place?

16"
1 in 8"
Medium weight finished at .750"
Threaded (not sure which threads)
Gas port in the pistol position
Adjustable gas block that will fit under the hand guard
Long Free Float tube (~14-15")
A3 Flattop

Hoping to acheive less that 1moa with 220gr sub and 125gr super.

What else do I need to know?

Thanks....

Medic650
01-16-2009, 04:41 PM
Don't know if it matters but my SSK upper won't chamber brass made from military, ie Lake City, brass. Whisper brass formed from commercial 223 brass works fine.

MadDog
01-16-2009, 09:15 PM
I have an SSK upper. 10.5" 1 in 8 twist heavy match grade barrel. It is threaded for my gemtech HVT. I have not had time to work up a lot of loads to try in it. So far, 220gr and higher bullets are not stabilizing completely. JD says that is normal but I have not achieved the accuracy level that you are talking about. I'm not saying that it will not, just that mine has not. I have about 150 rounds through it so far and it is very reliable. All the brass that I have formed (including Lake City) has fed fine. I have another batch of loads to try but the weather has not been cooperating lately. hopefully I will find some loads that work.

Joe

Spook
01-16-2009, 11:38 PM
When you talk to Tammy tell her to thank JD for developing the cartridge that we're all having so much fun with. He's actually a really decent guy once you get through the crust :smile: and has no shortage of brains.

AC17
01-17-2009, 07:02 PM
It's a done deal, worked with Brian on the details. Went with a less than full bull barrel and asked for 5/8 x24 threads for AR10 muzzle goodies.

Need to order some 208s and start making brass. Six to 8 weeks wait is going to creep along.....

rumlover
01-17-2009, 08:12 PM
what was the final price tag?

AC17
01-18-2009, 11:31 AM
Just short of 1300....