new to 300's

[waterweasle]

hey guys I'm hoping you can point me in the right direction, I'm looking to get a 300 whisper barrel from the T/C custom shop for my encore, I need some advice though, I want the shortest reasonable barrel( its on a rifle platform) rate of rifling( using 150-180 grain bullets for deer) if anyone can answer these for me that would be great
thanks
Stan

[Quarterbore]

You might want more advise then just my own as I have yet to hunt deer with my own 300 Whisper. Just the same, I think that you would be very wise to consider the Single Shot Pistol bullets in the 125-gr range as being very good big game bullets.

As for the barrel length, with the 300 Whisper there is so little powder being burned this really is a non-issue for a rifle. A 16-inch barrel is the shortest you can have unless you wish to register it as a Short Barreled Rifle (http://quarterbore.com/forums/viewforum.php?f=22)

As for the twist rate, if you will never shoot subsonic loads then the standard 1:10 twist barrel is fine. If you are getting a barrel from T/C it will be 1:10 (or is it 1:12?) as that is the only twist they make. If you want to shoot subsonic loads then you really need a 1:8 twist barrel!

The 1:8 Twist barrel will work with all bullet weights while doing better with the heavy bullets while the 1:10 twist will only work with bullets upto about the 180-200-gr weight but it will give better performance with the 125-150gr bullets you will be hunting with...

Hopefully you will get other oppinions as well!