krazykongo
01-03-2008, 11:18 AM
Hi everybody
I joined this forum today and this is my first post.
The reason I am here is that Im looking to buy a lathe to be able to do some projects with my hobby. My hobby is yoyoing and i guess youd be thinking what id need a lathe for. Well, id need a lathe to modify yoyos to make them play differently or just for aesthetics. Here are some pics of modification other people have done:
this is what a typical yoyo's guts would look like
http://inlinethumb35.webshots.com/38050/2021505350059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2021505350059475447taWHVj)
http://inlinethumb36.webshots.com/36771/2020609140059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2020609140059475447fRpcec)
these are the types of mods that can be done
http://inlinethumb29.webshots.com/39708/2886296100059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2886296100059475447Gkpdvy)
you can see the recessed ring grooves that have been machined
http://inlinethumb12.webshots.com/37771/2300683470059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2300683470059475447rwIRBo)
http://inlinethumb26.webshots.com/38937/2816298750059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2816298750059475447oYSDSd)
and here is another mod that chops down the width of the yoyo
original
http://inlinethumb18.webshots.com/35729/2489495990059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2489495990059475447YFsBqO)
modified (chopped)
http://inlinethumb12.webshots.com/36363/2165856000059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2165856000059475447GfoUZm)
Ok, after looking at those photos, would anyboddy be able to help me in finding a suitable lathe.
The yoyos are typically made of aluminium, some are plastic, some are titanium (although very very rare).
They vary in size but wouldnt surpass 70mm x 70mm x 70mm.
I wouldnt want to spend the least possible. Ive seen some mini metal lathes ranging from £160 to £300 and this would be acceptable but i would rather spend less than more.
How accurate would these lathes be? Would i be able to do two identical mods to each half of the yoyo?
What other stuff would i need to buy besides the lathe and cutting tools?
Any help would be much appreciated.
thanks
Kong
I joined this forum today and this is my first post.
The reason I am here is that Im looking to buy a lathe to be able to do some projects with my hobby. My hobby is yoyoing and i guess youd be thinking what id need a lathe for. Well, id need a lathe to modify yoyos to make them play differently or just for aesthetics. Here are some pics of modification other people have done:
this is what a typical yoyo's guts would look like
http://inlinethumb35.webshots.com/38050/2021505350059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2021505350059475447taWHVj)
http://inlinethumb36.webshots.com/36771/2020609140059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2020609140059475447fRpcec)
these are the types of mods that can be done
http://inlinethumb29.webshots.com/39708/2886296100059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2886296100059475447Gkpdvy)
you can see the recessed ring grooves that have been machined
http://inlinethumb12.webshots.com/37771/2300683470059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2300683470059475447rwIRBo)
http://inlinethumb26.webshots.com/38937/2816298750059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2816298750059475447oYSDSd)
and here is another mod that chops down the width of the yoyo
original
http://inlinethumb18.webshots.com/35729/2489495990059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2489495990059475447YFsBqO)
modified (chopped)
http://inlinethumb12.webshots.com/36363/2165856000059475447S425x425Q85.jpg (http://good-times.webshots.com/photo/2165856000059475447GfoUZm)
Ok, after looking at those photos, would anyboddy be able to help me in finding a suitable lathe.
The yoyos are typically made of aluminium, some are plastic, some are titanium (although very very rare).
They vary in size but wouldnt surpass 70mm x 70mm x 70mm.
I wouldnt want to spend the least possible. Ive seen some mini metal lathes ranging from £160 to £300 and this would be acceptable but i would rather spend less than more.
How accurate would these lathes be? Would i be able to do two identical mods to each half of the yoyo?
What other stuff would i need to buy besides the lathe and cutting tools?
Any help would be much appreciated.
thanks
Kong