Log in

View Full Version : indentify this m9 please


becks
08-21-2007, 10:07 AM
it is 3rd generation, no markings whatsoever,rectangle handle. thanks
http://www.quarterbore.net/forums/photopost/showphoto.php/photo/346/cat/500/ppuser/1790

biboufab
08-21-2007, 11:30 AM
it is 3rd generation, no markings whatsoever,rectangle handle. thanks
http://www.quarterbore.net/forums/photopost/showphoto.php/photo/346/cat/500/ppuser/1790
Hi , perhaps it's a German made ( or / and ) Holland made ..... KCB 70 for the Stoner M63 .

By WWW.M9M4.COM

biboufab
08-21-2007, 11:34 AM
Hi , perhaps it's a german or holland made during the vietnam period tested by the MARINES , for the STONER M63 .

I hope this reply is correct .....:frown:

By , Fabrizio FOR : WWW.M9M4.COM

porterkids
08-21-2007, 07:46 PM
It is not an M9. It is an Eickhorn KCB77 bayonet.

porterkids
08-21-2007, 07:48 PM
Hello Fabrizio, my friend. It is similar to the KCB70, but not quite the same.

Oldsmithy
10-27-2007, 09:14 AM
There are a multitude of variations on these commercial bayonets, with various lengths, with and without wire cutters, and for weapons other than the M16, i have a few on my site and keep trying to get new ones to extend my collection further.